Where is the Prinergy Forum? [Archive]

rob.morgan

10-10-2007, 05:18 PM

Its under the Workflow heading. If you don't see it then your account may not have permissions to see it.

Cheers,
Rob

JBrs

10-10-2007, 05:59 PM

How do I get permission to view Workflow heading?

tclifford

10-10-2007, 06:35 PM

Hello...try now. I changed you defaults and you should be able to see the prinergy forums...

thomas

JBrs

10-10-2007, 06:36 PM

Thank you Thomas!

RiotMac

10-15-2007, 04:46 PM

Can I get in on this Prinergy forum? I am going to be upgrading to Prinergy in a couple weeks and would like to read up on what people have to say.
Thanks

tclifford

10-15-2007, 06:11 PM

Brad you should be all set.

tc

Can I get in on this Prinergy forum? I am going to be upgrading to Prinergy in a couple weeks and would like to read up on what people have to say.
Thanks

CGraym3q

01-14-2008, 03:22 PM

Can you set me up to see this forum please, we are upgrading to version 4 very soon.

JElwart

02-12-2008, 12:40 PM

Can you also set me up to see the Prinergy Forum. We are looking to upgrade to Prinergy 4 along with new servers. Thank you.

prepshopboy

02-20-2008, 04:18 AM

I too would like access to the Prinergy forum please.

TIA,

David.

tclifford

02-20-2008, 05:59 PM

You should all be able to see the prinergy forums...
[/URL] [URL="http://www.mygua.org/forums/index.php"]GUA Forums (http://www.mygua.org/forums/images/misc/navbits_start.gif) > Commercial Printing (http://www.mygua.org/forums/forumdisplay.php?f=15)
let me know if not.

Thomas

DBotsford

02-21-2008, 04:28 PM

I don't see it either, please include me!

tclifford

02-21-2008, 05:10 PM

try now..

thomas

I don't see it either, please include me!

DBotsford

02-21-2008, 09:24 PM

Perfect thanks.

prepshopboy

02-22-2008, 01:30 AM

Every time I try to access the GUA / Commercial Printing forum, I get the follow message:

prepshopboy, you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

I joined on the 18th, its now the 22nd. How much longer do I have to wait to have access to this fort knox of a forum?

robert.hammen

02-22-2008, 01:48 AM

I've emailed Tom to get you access to the Prinergy forum. Should be done in the next day - knowing Tom, likely far quicker :)

prepshopboy

02-22-2008, 05:17 AM

Many thanks Robert. I'm just eager to dive into it.

BTW, nice place WI - I was in a small town called Slinger back in '97.

Regards,

David.

robert.hammen

02-22-2008, 01:32 PM

You should now have access to the Prinergy forum - let me know if you don't.

Dunno if you're still in Oz, but I drive (when it's not all snow and ice 'round here) an Australian car (Holden Monaro a/k/a Pontiac GTO here in the 'states :)

prepshopboy

02-22-2008, 03:01 PM

Still no go with that forum access. It's the weekend here so I won't be hammering away at the fort but hoping it will be ready for Monday? That'd be great.

Three thumbs up for your car choice, very nice! To further the story, I used to live in the town where they used to make them (Adelaide, South Australia). My stint in WI in '97 was just a brief visit.

Cheers,

David.

tclifford

02-22-2008, 03:31 PM

My fault.. I had the wrong setting. Try now. Sorry about this but we have to validate each user to make sure they are users and to people trying to cause trouble.

ssutton503

02-26-2008, 10:41 PM

Not sure if this is the route to go to get access to the Prinergy forum but if so, please add me to those able to see the forum. While we use Prinergy EVO and I see that that product has a forum under the Newspaper forum I would still like to follow issues on Prinergy if possible. Thanks!

robert.hammen

02-26-2008, 11:48 PM

Emailed Tom and asked him to upgrade your access...

tclifford

02-27-2008, 03:15 AM

You should be good to go...

thomas

Not sure if this is the route to go to get access to the Prinergy forum but if so, please add me to those able to see the forum. While we use Prinergy EVO and I see that that product has a forum under the Newspaper forum I would still like to follow issues on Prinergy if possible. Thanks!

CGraym3q

04-03-2008, 03:11 PM

I still cannot get access to the Prinergy forum, help please!

tclifford

04-03-2008, 03:21 PM

Hello, Your settings have been updated...sorry for the delay - tc

jlee

06-03-2010, 04:56 PM

Ditto.
Recently upgraded to Prinergy 5 and needing some assistance and feedback from other users.

Thanks.

Jae

tclifford

06-03-2010, 05:16 PM

try now...

thomas

Ditto.
Recently upgraded to Prinergy 5 and needing some assistance and feedback from other users.

Thanks.

Jae

johnb3

07-28-2010, 07:05 PM

Is there a Prinergy forum? RBA Forum? i see nothing to point me in the right direction either here or on the control panel. Do I have to ask someone for permission?

tclifford

08-02-2010, 02:51 PM

John, please look now...

thomas

Is there a Prinergy forum? RBA Forum? i see nothing to point me in the right direction either here or on the control panel. Do I have to ask someone for permission?

johnb3

08-02-2010, 07:00 PM

Thank you Thomas

macman

08-13-2010, 03:50 AM

Hi, I am a new member (first post) and would like access to the Prinergy forum, is this possible please?

macman

08-23-2010, 05:52 AM

I would really like access... Please?

tozio

08-23-2010, 12:49 PM

Whoever is the admn for your site, needs to give you a user name and password.

guaadmin

08-23-2010, 09:24 PM

I would really like access... Please?
Hi macman! I checked your permissions and you do have access to the Prinergy forums.
They are located here: http://www.mygua.org/forums/forumdisplay.php?f=18

GUA Forums > Commercial Printing > Workflow > Prinergy

Message me back and let me know if you still are having troubles viewing them.

Thanks,
Amanda

davidma

10-15-2010, 09:10 PM

can I be added to the list, please.

thanks,
David

paolig

10-19-2010, 07:40 AM

Hi Amanda,

I've the same question, please can you add also me to the Pgy "forum" list? Regards, Gianluca.

guaadmin

10-22-2010, 12:58 AM

paolig and davidma -

I have updated your accounts for you!
Any questions, please let me know!

Thanks,
Amanda

toddsyx66

10-13-2011, 01:58 PM

We are running Prinergy 5.3, can I also get access to the workflows. Is the RBA Group still active? I woild like to be part of that one to. Thanks!

tclifford

10-13-2011, 02:03 PM

Good morning. Please log out and log back in. You should be able to see all the forums now....

please advise

Thomas

ronnie

10-17-2011, 02:55 PM

Could I get access please?

Thanks

ronnie

10-17-2011, 02:56 PM

We are running Prinergy 5.3, can I also get access to the workflows. Is the RBA Group still active? I woild like to be part of that one to. Thanks!

This one as well for me if possible. We are looking at RBA, and I'd love to see some of the rules that people have done.

tclifford

10-17-2011, 03:13 PM

Ronnie,

you should be all set. Please log off and log back on and you should see all the forums... let me know

Rock on

tc

toddsyx66

10-17-2011, 05:38 PM

Got em all! Thank You much!

CatalogKing

10-21-2011, 03:21 AM

I can't find the prinergy forum either. Considering buying, also interested in learning about proofing.

Thanks,

tclifford

10-21-2011, 03:27 PM

Try now!

rock on

TC

ronnie

10-21-2011, 04:22 PM

Ronnie,

you should be all set. Please log off and log back on and you should see all the forums... let me know

Rock on

tc

Got it.

Thanks a bunch!