PDA

View Full Version : Too Much Magenta


mwhayes
06-11-2009, 06:39 PM
I am running PSM 7.1 to a Dolev 250 on a Mac. Everything that I run out has a purple look to it. I think that the magenta is too strong. What can I do to correct this problem?

Thanks,
Michael

barak.paltiel
06-16-2009, 03:29 PM
Hello Michael.

In short:

-Create a magenta color strip and RIP to disk
and check with PressTouch that the values strips values
are correct.
-Create a film from the file. Check with microscope
and densitometer. If the film looks dirty, check you processor
(Suspect # 1). if this is good, you may need to create an Ex-Curve,
follow the instructions in the User Guide.

HTH

P. Barak