PDA

View Full Version : Preps 5.2 Work and Turn Marks Trouble


jon
05-05-2006, 12:34 AM
On a work and turn template in 5.2, after applying crop marks, I want to delete the marks in the center gutter. When selecting only the marks that are actually in the gutter, all marks aligned to that gutter get selected. In previous versions only the selected marks would show as being selected. Is this a bug or a config setting?

stevell72
05-05-2006, 02:04 PM
No its not a bug if you want to put crops that you can select as individual
you do that under template menu and under Modify Template if you put crop marks on under Smart Marks they will all be selected. Also on all my work and turn i use flat impo you might want to try that also.
steve

jon
05-05-2006, 07:37 PM
I do use the flat work style, but in many instances work and turn is more convenient. I am not using smart marks, I am applying crop marks via modify template page. This does appear to be a bug in the new version. Version 5.1.5 works correctly.

To test for yourself:
1.Create a 25" x 19" work and turn template in preps 5.2
2.Build an impo with 1 horizontal and 4 vertical of 3" x 7" page size
3.Apply crop marks to all pages via modify page template
4.Select individual crop marks on the front and see which corresponding mark is selecting on the back. Note that in my case it appears to be the mark which is diagonally opposed to the selected mark.
5.Verify that it is different in previous versions.

Thank you.

webdots
05-08-2006, 08:44 AM
Jon,

I have the same issue with 5.2, indeed only with work and turn templates.
Didn't have that either with previous versions.

Paul