|
|
|
#1
|
||||
|
||||
|
What about a thread with some photos of our systems and servers room?
I start ![]() 1 - Prinergy servers; 2 - Gigabit switch and KVM console; 3 - Ripro and old storage towers (we convert the ripro in a 1.2 Tb storage server, just using old towers eheheh) 4 - The AIT jukebox 5 - The AC unit in the servers room That's all for now, I hope you like to see my photos, I'm waiting for yours ![]() Hugs Ricardo
__________________
From Kodak/Creo: Prinergy: Connect 5.1 | Insite: 6 | Preps: 5.3.3 | Scanner: IQ Smart3 | Proofer: Matchprint 2xEpson 4880 | Servers: 1 Primary Server | 1 Secondary Server | 2 Tertiary servers | 1 Insite Server ------------------ From others: 1 Epson 7600 | 1 Xerox 550 with Freeflow RIP | 1 HP 750 |
|
#2
|
||||
|
||||
|
Don't be shy
![]()
__________________
From Kodak/Creo: Prinergy: Connect 5.1 | Insite: 6 | Preps: 5.3.3 | Scanner: IQ Smart3 | Proofer: Matchprint 2xEpson 4880 | Servers: 1 Primary Server | 1 Secondary Server | 2 Tertiary servers | 1 Insite Server ------------------ From others: 1 Epson 7600 | 1 Xerox 550 with Freeflow RIP | 1 HP 750 |
|
#3
|
||||
|
||||
|
Is that a Ripro Raid and Brisque? Ah, the good old days.
__________________
Mark Jetzer GUA Board Member | Access Business Group / Amway| Ada MI | Prinergy 5.1 Connect/PowerPack Dual Magnus 800s, ThermoFlex Mid II GMG/Epson7900 Inkjets, Matchprint 8up Proofer/Epson 9880 Preps, Pandora 3.0, Upfront, InSite 6, RBA, APA, Storefront and the kitchen sink
|
|
#4
|
||||
|
||||
|
Just the ripro ehehe we had 2 brisques until last year when we bought the Prinergy system
![]()
__________________
From Kodak/Creo: Prinergy: Connect 5.1 | Insite: 6 | Preps: 5.3.3 | Scanner: IQ Smart3 | Proofer: Matchprint 2xEpson 4880 | Servers: 1 Primary Server | 1 Secondary Server | 2 Tertiary servers | 1 Insite Server ------------------ From others: 1 Epson 7600 | 1 Xerox 550 with Freeflow RIP | 1 HP 750 |
|
#5
|
||||
|
||||
|
lots of views, but photos...
![]()
__________________
From Kodak/Creo: Prinergy: Connect 5.1 | Insite: 6 | Preps: 5.3.3 | Scanner: IQ Smart3 | Proofer: Matchprint 2xEpson 4880 | Servers: 1 Primary Server | 1 Secondary Server | 2 Tertiary servers | 1 Insite Server ------------------ From others: 1 Epson 7600 | 1 Xerox 550 with Freeflow RIP | 1 HP 750 |
|
#6
|
|||
|
|||
|
__________________
Erwin Harmsen | Technology and Solutions Specialist | Europe, Africa, Middle East Region | Graphic Communications Group | Kodak SA/NV | 62, Rue Général De Gaulle | B-1310 La Hulpe | Belgium erwin.harmsen@kodak.com | T +32 2 352 2504 | F +32 2 352 2824 |
|
#7
|
||||
|
||||
|
Impressive erwin
![]() Can you give us a little explanation about it? ![]() We want ours mounted in rack too, but the big boss (grrrrrrrrr) forget to mentioned it to Kodak. Ricardo
__________________
From Kodak/Creo: Prinergy: Connect 5.1 | Insite: 6 | Preps: 5.3.3 | Scanner: IQ Smart3 | Proofer: Matchprint 2xEpson 4880 | Servers: 1 Primary Server | 1 Secondary Server | 2 Tertiary servers | 1 Insite Server ------------------ From others: 1 Epson 7600 | 1 Xerox 550 with Freeflow RIP | 1 HP 750 Last edited by rmagalhaes; 11-27-2009 at 08:34 AM. |
|
#8
|
|||
|
|||
|
rmagalhaes,
Hey, nice photos. I don't know if you know or would spend the money, but Dell does sell conversion kits for many of their servers to be converted from towers to rack servers. I am not entirely sure the cost per, but it might be worth a look. I was wondering, the infrasture you showed in your photos is all for prepress, do you have a similar setup for your corporate network? If so, why did you isolate your prepress infrastructure? |
|
#9
|
||||
|
||||
|
Hi Rugby
![]() Yes, what you saw in the photos is just for the Prepress departament. We have this "small" data center in Prepress (we like independence ehehe) and a bigger one for the corporate network. Ricardo ps: hey... and your photos? ![]() ps1: two more photos, Veris proofers and our old improofers (Epson7600 and a couple of Iris43 wide)
__________________
From Kodak/Creo: Prinergy: Connect 5.1 | Insite: 6 | Preps: 5.3.3 | Scanner: IQ Smart3 | Proofer: Matchprint 2xEpson 4880 | Servers: 1 Primary Server | 1 Secondary Server | 2 Tertiary servers | 1 Insite Server ------------------ From others: 1 Epson 7600 | 1 Xerox 550 with Freeflow RIP | 1 HP 750 Last edited by rmagalhaes; 11-23-2009 at 04:28 PM. |
|
#10
|
|||
|
|||
|
Ricardo,
I am curious why you have elected to maintain a seperate "small" data center in prepress and not share common resources (i.e. UPS(s), Generator(s), Cooling, etc.). Does the prepress department employee someone trained in security, disaster recovery, etc.? |
![]() |
| Thread Tools | |
| Display Modes | |
|
|